Driver HP Laserjet P1005 Windows 7 Problems – 123.hp.com/setup

  1. driver HP LaserJet p1005 Windows 7

Troubleshoot your Driver HP Laserjet P1005 Windows 7

Follow this blog to troubleshoot some common problems faced by Driver HP LaserJet p1005 windows 7. The most common one is the printer is offline. Use the steps given below and solve your printer problem

Method 1- reset the printer:

When you reset your printer, it can reestablish a connection with the computer.

  • Power on your printer.
  • Check the status of the printer.
    • If you get the print output from the printing queue you can stop the troubleshoot.
    • Your problem is rectified.
    • The printer might be online if the printer goes to an idle state.
    • If your printer is still online, continue with the steps given below
  • Remove the power cord from the printer when the printer is ON.

This process essentially involves shutting down all devices to resolve driver HP LaserJet p1005 Windows 7 issues.

  • Take off the power cord from the wall mount power supply
  • Wait for a minute before reconnecting the power cord.
  • Meanwhile, shut down your computer and start it again
  • Insert the power cord to the wall mount power hub.
  • Connect the power cord to your printer(123.hp.com/setup)
  • Power on your printer
  • Connect your printer to a network/computer
    • Open the wireless network settings from the printer control panel
      • Turn on the wireless signal
      • Check if the light is steady next to the wireless icon
    • For wired connection
      • Connect the Ethernet cable to a correct port.
      • Check if the green light is steady
      • Orange light should blink
    • USB connection for driver HP LaserJet p1005 Windows 7 installation
      • Make sure you choose the correct USB cable
      • Try changing the port if the problem still persists
      • Change the cable if needed.
    • Try performing the printer functionalities
      • If you can print then the printer is working fine
      • It is again online
      • Read below if you cannot print.

Method 2: add the printer again (HP Printer Assistance):

Uninstall the printer from your system/laptop

  • Click on start and open control panel.
  • Open the Device and Printers window.
  •  Right-click on your HP printer icon.
  • Choose Remove Device to delete the HP printer.
  • Remove if there is any other printer found.
  • Open the HP Printer Assistant.
  • This will help you add driver HP LaserJet p1005 Windows 7 printer
  • Search for your printer name, and then find your printer name in the list.
  • Read everything that comes on the screen
  • Respond to all that and add the printer.
  • Right click on your printer name and Select Printer Properties  from the Devices and Printers window,
  • Click the Ports tab from the properties window,
  • Choose the Standard Port you created earlier.
  • Perform the printer functionalities
  • If you can print then the printer is working fine

If the problem still persists, visit 123-hp-com-laserjet.com. Contact our customer care executives at +1-855-674-8450. They can guide you to solve your issue with Driver HP LaserJet p1005 windows 7

Leave a Reply

Your email address will not be published. Required fields are marked *