HP LaserJet Pro MFP M177FW Toner Replacement – 123.hp.com/setup

  1. HP LaserJet Pro MFP M177FW toner replacement

Steps to do HP Laserjet Pro MFP M177FW Toner Replacement

LaserJet printers are very sturdy and efficient in the office environment. Withstanding high demands they have a long life without giving too much trouble to their users. Having said that, it is extremely important that you keep your printer ready at all times. You can do that by replacing cartridges and toners and performing proper cleanup routines regularly. Here we are going to show you how you can effectively do the HP LaserJet Pro MFP M177FW toner replacement.

  1. Open the scanner assembly

To begin the process, you will first have to open the scanner assembly in your printer. This is where the toner is located.

  1. The top cover has to be propped open

On top of the toner cartridge is another cover called the top cover that has to be kept open along with the scanner assembly.

  1. Take the toner cartridge out of the printer

Carefully remove the toner cartridge from the printer. Make sure you do it slowly or else you may end up causing some damage to the holder clips.

  1. Unpack the new toner cartridge to perform the HP LaserJet Pro MFP M177FW toner replacement. If you want to download latest software drive go to 123.hp.com/setup

Get rid of the packing materials surrounding your new toner cartridge. Recycle the packing materials for a greener environment.

  1. Remove the Orange clip and the orange tape

Before inserting your new toner cartridge into the printer, make sure you remove the orange clip and the orange tape. They are there only to prevent any damage from happening to the toner during transit.

  1. Sway the toner before inserting

To even out the ink on the toner, it would be wiser to rock it to and fro before inserting it into your printer.

  1. Make sure the toner is free of packing materials

It is mandatory that you thoroughly check your toner for any leftover packing materials before inserting it into the printer. Because this can cause hindrances to the proper functioning of the printing device in the future.

  1. Insert the toner cartridge

After making sure of the above prerequisites, you may now carefully insert the toner cartridge into the printer for successfully completing the toner cartridge replacement.

  1. Close all the open covers

After insertion, you may now proceed to close the top cover and the scanner assembly that were opened initially.Align them properly because if they are not seated correctly, you may have issues with the device later on.

If you find it difficult to follow written instructions for the HP LaserJet Pro MFP M177FW toner replacement and need personalized help or assistance, reach out to us on our toll-free number now at +1-855-674-8450 or visit us at 123-hp-com-laserjet.com

Leave a Reply

Your email address will not be published. Required fields are marked *