Wireless Setup For Laserjet Pro MFT M127FW – 123.hp.com/setup

  1. HP Laserjet Pro MFT M127FW Wireless Setup

HP Laserjet Pro MFT M127FW Wireless Setup

To set up the HP Laserjet Pro MFT m127fw wireless setup on a wireless (Wi-Fi) network:

  • Connect it to the network
  • Install the print driver and software
  • Go to the manufacturer’s website to achieve this
  • Select Wireless as the connection type when prompted during the installation

To complete the laserjet pro mfp m127fw wireless setup (123.hp.com/setup):

  • Before you set up the printer on your wireless network:
  • Gather the network name and password
  • Turn on your:
    • Router
    • Printer
    • Computer

Rhe printer should be prepared for an installation for a wireless networkand the following items must be collected:

  • The network name is also the SSID (Service Set Identifier)
  • The WEP key or WPA security passphrase is the password
  • To your wireless network a computer should be connected

Access to the Internet: A broadband Internet access such ascable or DSL is recommended by HP for:

  • Software downloads
  • Using Web Services
  • Getting printer updates

Any USB or Ethernet cableis to be disconnectedfrom the printer

To switch to a wireless connection if you have already installed the printer with a USB or wired connection:

  • Go to All Programs in Windows
    • In the list of results click on All Programs
    • Click HP
    • Then click the folder for the printer
    • Select Reconfigure your HP device.
    • To finish reconfiguring your printer installation follow the on-screen instructions

The wireless network connection:

  • The Wireless Setup Wizard can be used to connect the printer to the network
  • During the installationHP installer can find the printer
  • Press the Wireless button (look for it on the printer control panel)
  • Then select Wireless Menu
  • Select the Wireless Setup Wizard
  • From the list of networksdisplayed select your network name (SSID)
  • Enter your wireless security passphrase (WPA, WPA2, or WEP) when prompted
  • NOTE: The exact uppercase and lowercase letters must be entered for a successful connection
  • Press OK after you finish entering the WEP key or WPA key
  • To return to the home screen press OK again

Installation of the driver

  • Thelatest version of the full feature printer software should be downloaded and installedfrom the manufacturer’s website
  • NOTE: Alternativelyyou can use the installation CD to install the driver and software

If want any technical guidance regarding wireless setup you may contact our customer support team @ 1-855-674-8450 and visit us https://www.123-hp-com-laserjet.com to get instant solution for your issues.

Leave a Reply

Your email address will not be published. Required fields are marked *