HP Laserjet Pro p1606dn Troubleshooting -123.hp.com/setup

  1. HP Laserjet Pro p1606dn Troubleshooting

HP Laserjet Pro p1606dn Troubleshooting

HP Laserjet Pro p1606dn printer (123.hp.com/setup) is one among the fast and high-quality printer introduced by Hp. Good paper capacity, automatic duplexing becomes few of the best features of HP Laserjet Pro p1606dn printer. Though the printer has the best and the top features, many of the users face errors using HP Laserjet Pro p1606dn printer. Here are some of the trouble shooting steps you can follow for HP Laserjet Pro p1606dn troubleshooting.

Error code 10

The above code indicates that the there is a problem with the toner cartridge. Try resetting your printer first by switching it on and off.

Error code 16

The above code indicates that the toner cartridge is low. You can try replacing the cartridges to ensure a safe and effective printing.

Error code 21

Error code 21 is most common when the print job exceeds the memory capacity. Always try reducing the number and the size of the print job.

Other guidelines for HP Laserjet Pro p1606dn troubleshooting

  • Always try performing a Factory reset and most of the errors can be reduced.
  • Try installing additional memory to the printer if available.

Error 14

The above error code occurs when no cartridge is installed. Remove the cartridge now and try installing it again and the above error code can be resolved.

Error code 49

The error occurs when the firmware is not properly updated. Check for the quality and the working condition of your printer cables. Purchase a high-quality cable and replace the old cable.

If you have followed all the steps in trouble shooting and still the problem is not resolved, the error can be with the hardware. Ensure that the software and the hardware you are using is the updated one.

Visit the respective website of your printer and start downloading the latest version of the firmware and the software.

HP error code 20

When your memory is full and you do not have enough space, you will get the error code 20. Always try reducing the size of the printer job if the current memory of your printer is exceeded.

Follow the above guidelines for the HP Laserjet Pro p1606dn troubleshooting. If you still find any difficulty in understanding the above guidelines, call us on our toll-free number 1-855-674-8450 and our network support team is here to assist you at https://www.123-hp-com-laserjet.com.

Leave a Reply

Your email address will not be published. Required fields are marked *